Product Summary

The PEB3465H-V1.2 is a NMultichannel Subscriber Line Interface Concept MuSLIC. It is a chipset of three highly sophisticated ICs, bridges the gap between the analog and the digital signal transmission in modern telecommunication systems. The PEB3465H-V1.2 supports to realize an extremely compact analog subscriber line interface module. The PEB3465H-V1.2 is made of the best fitting technology (CMOS, BiCMOS and smart power technology) and the standard SMD-packages P-MQFP and P-DSO are used.

Parametrics

PEB3465H-V1.2 absolute maximum ratings: (1)VDDA-VDDD referred to GNDA-GNDD:-0.3V to 5.5V; (2)VDDI referred to GNDI:-0.3V to 5.5V; (3)VSS referred to all GND pins:-5.5V to 0.3V; (4)GNDA-GNDD to GNDI:-0.3V to 0.3V; (5)VDDA-VDDD to VDDI:-0.3V to 0.3V; (6)analog input and output voltages: referred to VDD=5V(VSS=-5V):-10.3V to 0.3V, referred to VSS=-5V(VDD=5V):-0.3V to 10.3V; (7)all digital input voltages: referred to GNDI=0V (VDDI=5V):-0.3V to 5.3V, referred to VDDI=5V (GNDI=0V):-5.3V to 0.3V; (8)DC input and output current at any input or output pin:100mA; (9)ambient temperature under bias:-10℃ to 80℃; (10)power dissipation:1W.

Features

PEB3465H-V1.2 features: (1)chip set of three well fitted chips optimized for a 16 POTS-base system; (2)including all low and high voltage SLIC functions; (3)only a few external components are required; (4)no trimming or adjustments are required; (5)specification according to relevant ITU-T, LSSGR and DTAG recommendations; (6)digital signal processing technique; (7)advanced low power CMOS and BICMOS and smart power technology; (8)PCM encoded digital voice transmission; (9)two seial IOM-2 interfaces with together 6 pins; (10)12pin, 8 bits parallel microcontroller interface; (11)high performance AD and DA conversion; (12)offhook detection with programmable thresholds for all operating modes; (13)integrated ring trip detection with zero crossing turn off functions; (14)ground start and loop start possible; (15)integrated checksum calculation for CRAM; (16)linecard identification; (17)sensing of transversal and longitudinal line current; (18)boosted battery mode with up to 150V supply for long telephone lines and up to 85Vrms balanced ringing; (19)reliable 170V smart power technology; (20)standard SMD package: P-MQFP-44 and P-MQFP-80 for the low voltage parts and small power package P-DSO-20 for the high voltage device.

Diagrams

PEB3465H-V1.2 block diagram

PEB3065
PEB3065

Other


Data Sheet

Negotiable 
PEB3081HV1.4
PEB3081HV1.4

Infineon Technologies

ISDN Interface ISDN

Data Sheet

Negotiable 
PEB3086
PEB3086

Other


Data Sheet

Negotiable 
PEB3086HV1.4
PEB3086HV1.4

Infineon Technologies

ISDN Interface ISDN

Data Sheet

Negotiable 
PEB3164FV1.1
PEB3164FV1.1

Infineon Technologies

Audio CODECs CODEC & SLIC

Data Sheet

Negotiable 
PEB31665
PEB31665

Other


Data Sheet

Negotiable